You have no items in your shopping cart.
Protect your drivetrain, lower operating temperatures, and make fluid changes effortless. Whether you are towing heavy loads, hitting off-road trails, racing, or daily driving, the ATS Deep Transmission Pan is a direct-fit, heavy-duty upgrade over your weak factory stamped-steel pan.
Lower Temperatures & Longer Fluid Life
Heat is the #1 enemy of any automatic transmission. By adding 2 additional quarts of ATF capacity and pairing it with external cooling fins, the ATS Deep Pan significantly improves heat dissipation. Because a larger volume of fluid takes longer to heat up and break down, your transmission maintains healthier oil viscosity and cleaner lubrication between scheduled maintenance intervals.
Superior Armor & Case Reinforcement
Factory stamped-steel pans dent and crush easily if you bottom out on a rock, trail obstacle, or deep pothole—often damaging the delicate valve body sitting directly above the pan. The ATS pan is cast from thick, heavy-duty aluminum that shrugs off impacts while bolting rigidly to the bottom of the transmission, reinforcing the entire case against torsional stress.
Optimal Fluid Pickup & Hassle-Free Servicing
Adding pan depth only works if your transmission can reliably draw fluid from the bottom. ATS includes a dedicated fluid pick-up tube extension that positions the intake at the exact optimal depth inside the pan, ensuring a constant, uninterrupted feed of ATF under hard acceleration, steep inclines, or heavy loads. When it is time to change your fluid, the integrated drain plug lets you service the transmission without spilling ATF all over your garage floor.
Direct replacement for the following factory MOPAR transmission pan part numbers:
Fits 2003–2011 Chrysler, Dodge, Ram, and Jeep models equipped with the 45RFE or 545RFE automatic transmission (2WD & 4WD):
| Make | Model | Years | Engine / Transmission Notes |
|---|---|---|---|
| Dodge / Ram | Ram 1500 | 2003–2011 | 4.7L V8 & 5.7L HEMI V8 (45RFE / 545RFE) |
| Dodge / Ram | Ram 2500 / 3500 | 2003–2011 | 5.7L HEMI V8 Gas Models (45RFE / 545RFE) |
| Dodge | Dakota | 2003–2011 | 4.7L V8 (45RFE / 545RFE) |
| Dodge | Durango | 2003–2009 | 4.7L V8 & 5.7L HEMI V8 (45RFE / 545RFE) |
| Chrysler | Aspen | 2007–2009 | 4.7L V8 & 5.7L HEMI V8 (545RFE) |
| Jeep | Grand Cherokee | 2003–2010 | 4.7L V8 & 5.7L HEMI V8 (45RFE / 545RFE) |
| Jeep | Commander | 2006–2010 | 4.7L V8 & 5.7L HEMI V8 (545RFE) |
| Jeep | Liberty | 2003–2007 | 3.7L V6 (select early 45RFE) & 2.8L CRD Diesel (545RFE) |
*Note: Does not fit 68RFE diesel transmissions or 42RLE / 46RE / 47RE / 48RE transmissions. Please verify your transmission pan bolt count (15 bolts) prior to ordering.
ATS Transmission packages carry a standard THREE YEAR Warranty. There are several exceptions, so refer to the Warranty’s specific terms and conditions . All labor, shipping, or any other charges associated with the product and the product’s failure are not covered under Warranty. Labor and/or shipping charges will not be refunded under any circumstance. After the one-year anniversary date of the original purchase, there is a limited parts replacement Warranty only. Transmissions that are purchased separately outside of a transmission package / stage and are installed without an ATS torque converter carry a 1 year parts only warranty and there is no labor or shipping allowance for transmission only purchases.
In the event of a product failure, the consumer must return the defective product to ATS for inspection before a replacement is sent to the consumer. After ATS inspects the product and completes the failure analysis, the inspection officer at ATS will provide written documentation stating the condition of the product and determine, to the best of his or her ability, what caused the malfunction or complaint. Based on the findings of the inspection report, ATS will determine whether there is a valid Warranty claim. Should a consumer require immediate service, and chooses not to wait for their product to be returned to ATS for inspection, service, and potential repair or replacement, the consumer can purchase a replacement product from ATS. The consumer must pay the full current MSRP, the applicable core charge, and shipping to and from ATS’ shop. When the defective product arrives, ATS will refund the core charge and inspect the product. During inspection, ATS will assess the product for warrantable damage. If the original product has indeed failed under the terms of the original Warranty, ATS will refund the full purchase price for the replacement product only. If the product has failed due to any issue not covered under the original Warranty, ATS will assess charges to the consumer based on any parts necessary to return the product to nominal ATS standards. ATS will deduct the total cost of required parts from the replacement product’s purchase price, and the consumer will be refunded the difference (if any) between the purchase price paid for the replacement product and the cost of parts.
If the consumer can wait for their product to be returned to ATS for inspection, service, and potential repair or replacement, the consumer pays shipping to and from ATS’ shop. When the defective product arrives in Colorado, ATS will inspect the product. ATS will then assess the product for warrantable damage. If the product has failed under the terms of the original Warranty contract, ATS will repair or replace the product – at ATS’s discretion. If the product has failed due to any issue not covered under the original Warranty, ATS will assess charges to the consumer based on any parts necessary to return the product to nominal ATS standards. ATS will bill the consumer for the total cost of parts required for repair of the product, and shipping to and from Colorado, prior to the repaired/replaced product being sent to the consumer.
This section incorporates Section 2, entitled “In the Event of a Failure.” ATS manual transmissions carry a 1-year/12,000 mile Warranty. ATS will not pay for any fluids replaced in the event of a transmission failure. There is no labor or freight warranty coverage on standard transmissions. Manual transmission shafts and gears are not covered by this Warranty on any transmission due to the capability of certain situations to cause stress-loads beyond the structural ability of the shaft or gear.