ATS modifies and upgrades the 545-RFE pump to allow pressures up to 200 and up psi. The factory pump uses the cast aluminum to serve as the high pressure pump...
ATS modifies and upgrades the 545-RFE pump to allow pressures up to 200 and up psi. The factory pump uses the cast aluminum to serve as the high pressure pump gear support bushing and the two idler gear support bushings, the reality is using the aluminum as a bushing at pressures above stock (110 PSI) is unreliable and the pump gear and housing fails prematurely.
The HD ATS pump is redesigned to withstand increased pressures over stock in excess of 200 and up PSI by installing a high pressure bushing material for the center pump gear to ride in and bushings to support the two idler gears.
These modifications not only ensure reliability but they also allow the pump to build more pressure across the RPM range be reducing hydraulic leaks. The Pressure regulator valve assembly and Lock up valve assembly is also reworked to promote proper function and durability. Features:
ATS 545RFE Upgraded Pump Package
Transmission Model: 545RFE
PSI: 200 and Up
Fits: Dodge Ram
Sold As: Kit
ATS LIMITED PRODUCT WARRANTY
ATS Transmission packages carry a ONE to FIVE YEAR Warranty. There are several exceptions, so refer to the Warranty’s specific terms and conditions . All labor, shipping, or any other charges associated with the product and the product’s failure are not covered under Warranty. Labor and/or shipping charges will not be refunded under any circumstance. After the one-year anniversary date of the original purchase, there is a limited parts replacement Warranty only. Transmissions that are purchased separately outside of a transmission package / stage and are installed without an ATS torque converter carry a 1 year parts only warranty and there is no labor or shipping allowance for transmission only purchases.
In the event of a product failure, the consumer must return the defective product to ATS for inspection before a replacement is sent to the consumer. After ATS inspects the product and completes the failure analysis, the inspection officer at ATS will provide written documentation stating the condition of the product and determine, to the best of his or her ability, what caused the malfunction or complaint. Based on the findings of the inspection report, ATS will determine whether there is a valid Warranty claim. Should a consumer require immediate service, and chooses not to wait for their product to be returned to ATS for inspection, service, and potential repair or replacement, the consumer can purchase a replacement product from ATS. The consumer must pay the full current MSRP, the applicable core charge, and shipping to and from ATS’ shop. When the defective product arrives, ATS will refund the core charge and inspect the product. During inspection, ATS will assess the product for warrantable damage. If the original product has indeed failed under the terms of the original Warranty, ATS will refund the full purchase price for the replacement product only. If the product has failed due to any issue not covered under the original Warranty, ATS will assess charges to the consumer based on any parts necessary to return the product to nominal ATS standards. ATS will deduct the total cost of required parts from the replacement product’s purchase price, and the consumer will be refunded the difference (if any) between the purchase price paid for the replacement product and the cost of parts.
If the consumer can wait for their product to be returned to ATS for inspection, service, and potential repair or replacement, the consumer pays shipping to and from ATS’ shop. When the defective product arrives in Colorado, ATS will inspect the product. ATS will then assess the product for warrantable damage. If the product has failed under the terms of the original Warranty contract, ATS will repair or replace the product – at ATS’s discretion. If the product has failed due to any issue not covered under the original Warranty, ATS will assess charges to the consumer based on any parts necessary to return the product to nominal ATS standards. ATS will bill the consumer for the total cost of parts required for repair of the product, and shipping to and from Colorado, prior to the repaired/replaced product being sent to the consumer.
ATS Manual Transmissions Warranty
This section incorporates Section 2, entitled “In the Event of a Failure.” ATS manual transmissions carry a 1-year/12,000 mile Warranty. ATS will not pay for any fluids replaced in the event of a transmission failure. There is no labor or freight warranty coverage on standard transmissions. Manual transmission shafts and gears are not covered by this Warranty on any transmission due to the capability of certain situations to cause stress-loads beyond the structural ability of the shaft or gear.
Late 1999-2007 Dodge Governor pressure sensor/switch transducer. Serving truck enthusiasts for nearly two decades, ATS invents, designs, manufactures, and sells the world's most innovative diesel truck performance products-over 600 products...
Line Pressure Sensor/Transducer 45RFE/545RFE/68RFE 1999-Current, OEM number 4799758AD, 3-Pin Design - Will Replace 4 Pin Design. ATS Diesel Performance was founded in 1993 and has been serving businesses, hobbyists and...
Serving truck enthusiasts for nearly two decades, ATS invents, designs, manufactures, and sells the world's most innovative diesel truck performance products-over 600 products for one-stop shopping. Whether you need power...
The main transmission case does not require a lot of conditioning aside from a few small hydraulic modifications to allow for proper oil flow. At higher power levels the transmission...
The valve body is considered the nervous system of the transmission, it is responsible for converting the electrical signals from the TCM into hydraulic actions. The 42-RLE uses a non-synchronous,...
Performance Valve Body use existing Solenoid Block/Pack 2007-2011 Jeep 42RLE. Serving truck enthusiasts for nearly two decades, ATS invents, designs, manufactures, and sells the world's most innovative diesel truck performance...
The valve body is considered the nervous system of the transmission, it is responsible for converting the electrical signals from the TCM into hydraulic actions. The 42-RLE uses a non-synchronous,...
Wastegate Adapter 45mm. For use with ATS Diesel WG and WG Manifolds. Serving truck enthusiasts for nearly two decades, ATS invents, designs, manufactures, and sells the world's most innovative diesel...
Pump Heavy Duty 47/48-RE 1996-2007 Dodge Ram. ATS Diesel Performance was founded in 1993 and has been serving businesses, hobbyists and racing enthusiasts ever since. Located in Arvada, Colorado, ATS...
